All simulations →

Cambridge IGCSE Physics 0625 · 1.6 Momentum Supplement

Crumple Zones, Airbags and Impulse

Try this: Choose a safety feature and press Crash. Then pick a different feature and crash again. The passenger's change in momentum is the same each time, but the stopping time is not. Compare the force–time graphs.
Predict first: if a safety feature makes the stopping time 10 times longer, what happens to the average force on the passenger? Does the area under the force–time graph change?

The crash is shown in very slow motion (40 times slower), so you can compare how long each stop takes.

Force–time graph for the passenger

Shaded area = impulse = change in momentum. Grey outlines are your earlier crashes at the same mass and speed. The dashed line is the average force.

Set up the crash

Readings Supplement

change in momentum Δp—
stopping time Δt—
average force F = Δp ÷ Δt—
peak force—
average force ÷ passenger's weight—
impulse = F Δt = Δ(m v)  ·  resultant force = change in momentum ÷ time taken, F = Δp ÷ Δt

Check yourself

1. A 60 kg passenger travelling at 20 m/s is brought to rest. What is the size of the change in momentum?

Δp = m Δv = 60 kg × 20 m/s = 1200 kg m/s.

2. The passenger in question 1 is stopped in 0.05 s without an airbag and in 0.40 s with one. What are the average forces?

F = 1200 ÷ 0.05 = 24 000 N without the airbag and F = 1200 ÷ 0.40 = 3000 N with it. Eight times the time gives one-eighth of the force.

3. Why does an airbag reduce injuries?

The change in momentum is fixed by the mass and speed. The airbag increases the time taken to stop, so F = Δp ÷ Δt is smaller.

4. What does the area under a force–time graph represent?

Area = force × time = impulse, which equals the change in momentum, Δ(m v).

5. A racket exerts an average force of 200 N on a ball for 0.010 s. What impulse does the ball receive?

Impulse = F Δt = 200 N × 0.010 s = 2.0 N s, so the ball's momentum changes by 2.0 kg m/s.